Cisco | Convert AIR-AP1815I from Lightweight to Mobility Express

Cisco Access Point AIR-AP1815I

I. Convert dari Mode WLC to Mobility Express
Noted: Donwload Link :
https://drive.google.com/drive/folders/1YPbmzQn55533STlhsCPXooNh7KdnRcmr?usp=sharing

HQ-AP-LT.01# logging console disable
HQ-AP-LT.01# capwap ap ip 10.0.0.10 255.255.255.0 10.0.0.2

VERIFIKASI
Ping dari AP ke Laptop, dan pastikan segment latop dengan AP  sama.

HQ-AP-LT.01# ping 10.0.0.2

HQ-AP-LT.01# sh ip int br
**Harusnya wired0 sdh dapat IP
Lalu buka tftp, siapkn imagenya di folder C\Progrtam Files\Tftpd64

Ketik perintah ini di AP untuk proces copy image dari latop ke AP, dan pastikan Tftpd sudah dibuka.

HQ-AP-LT.01# ap-type mobility-express tftp://10.0.0.2/AIR-AP1815-K9-ME-8-10-196-0.tar

**Noted: Namu jika gagal cara diatas bisa dengan cara reset Access Point nya Jika mau reset, Tekan tomobl reset lalu colok kable PoE sambil tahan tombol reset selama 25 detik.

(Cisco Controller) >apciscoshell
…
Reset Factory>
----------

Enter Administrative User Name (24 characters max): Cisco

Enter Administrative Password (3 to 127 characters): ******* (Test123)

Re-enter Administrative Password                 : ******* (Test123)

System Name [Cisco-70f0.96b7.fb60] (31 characters max): AIR-AP1815i-01

Enter User Name for AP (24 characters max): admin

Enter Password for AP (6 to 127 characters): ******* (Test123)

Re-enter Password for AP: ******* (Test123)

Enter Enable Password for AP (6 to 127 characters max): ******* (Test123)

Re-enter Enable Password for AP: ******* (Test123)

Enter Country Code list (enter 'help' for a list of countries) [US]: ID

Configure a NTP server now? [YES][no]:enter

Use default NTP servers [YES][no]: enter

Enter timezone location index (enter 'help' for a list of timezones): 24

Management Interface IP Address Configuration [STATIC][dhcp]: STATIC

Management Interface IP Address: 192.168.100.200

Management Interface Netmask: 255.255.255.0

Management Interface Default Router: 192.168.100.1

Create Management DHCP Scope? [yes][NO]: enter

Employee Network Name (SSID)?: TEST enter

Employee Network Security? [PSK][enterprise]:

Employee PSK Passphrase (8-63 characters)?: ******** (Test1234)

Re-enter Employee PSK Passphrase: ******** (Test1234)

Enable RF Parameter Optimization? [YES][no]: enter

Client Density [TYPICAL][Low][High]: enter

Traffic with Voice [NO][Yes]: enter

Set internal AP to Flex+Bridge mode [yes][NO]: enter

Configuration correct? If yes, system will save it and reset. [yes][NO]: yes

--porses..!!!! samapi selesai...

VERIFIKASI

VERIFIKASI:
(Cisco Controller)> show interface  detailed management
Akses IP AP dari Browser: https://192.168.1.100
Done..
-------------------------------------------------------------------------------

Tambahan Untuk Configure Switch Catalyst C9200
interface Vlan 20
ip address 10.87.20.1 255.255.255.0
exit

!
interface Vlan 10
 ip address 10.87.10.1 255.255.255.0
exit
!
interface Vlan 99
 desc MMGMT-WIFI
 ip address 192.168.1.1 255.255.255.0
exit
!
interface GigabitEthernet4/0/46
 description LINK-TO-AP
 switchport trunk native vlan 99
 switchport mode trunk
 spanning-tree portfast trunk
exit
!
interface GigabitEthernet4/0/47
 description LINK-TO-AP-ME
 switchport trunk native vlan 99
 switchport mode trunk
 spanning-tree portfast trunk
exit
!
ip dhcp pool vlan10
network 10.87.10.0 255.255.255.0
default-router 10.87.10.1
dns-server 10.87.10.1 8.8.8.8
exit
!
ip dhcp pool vlan20
network 10.87.20.0 255.255.255.0
default-router 10.87.20.1
dns-server 10.87.20.1 8.8.8.8
exit
!
ip dhcp pool vlan99
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 192.168.1.1 8.8.8.8
exit
-

Berbagi :